Wiring kit for the X03 X04 motor

New replacement wires with terminals suitable for the Hornby X03 X04 motors
Motor wiring kit
Wiring kit fitted to RX motor

 

This new wiring kit can be used on all the X03 X04 motors used in Hornby locomotives. The picture above shows the wiring kit fitted to the RX motor.

One wire is approx. 70mm (2 3/4") long and is fitted with a new eyelet to fit under the nut for the screw. The other wire is approx. 90mm (3 1/2") long and is fitted with a new pin to contact to the motor brush.

 
£2.75

 

If you are not sure if this part is for your locomotive then please contact us we can help you.
Home
Index of parts