Neodymium magnet for the vintage Hornby Dublo vertical motor

New replacement Neodymium magnet suitable for the vintage Hornby Dublo and Wrenn vertical motor

This new Neodymium magnet can be used on all the vintage Hornby Dublo and Wrenn vertical motors.

Improved motor performance with minimal effort. This magnet will give your Dublo vertical motor more torque and more speed.

These Hornby spares Neodymium Iron Boron magnets have a gauss level which is typically 2 - 4 times higher than standard Alnico magnets. They are nickel-plated for improved corrosion resistance and appearance.

Common applications:

• Wrenn, Hornby Dublo A4 class
• Wrenn, Hornby Dublo City class
• Wrenn, Hornby Dublo Duchess class
• Wrenn, Hornby Dublo 2-6-4 4M tank
• Wrenn, Hornby Dublo 0-6-2 N2 tank
• Wrenn, Hornby Dublo 0-6-0 R1 tank

Dimensions:

• Length (across poles): 14mm
• Width: 9mm
• Height: 9.5mm

Fitting instructions.

• Undo and remove the nut and bolt securing the original steel magnet and pole pieces.
• Remove the original steel magnet from the Dublo vertical motor.
• Carefully position the new Neodymium, without trapping fingers.
• Refit the pole pieces, nut and bolt.

Please see our Neodymium Magnet Safety Page for further information.